您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE AMS3337 Silicone (PVMQ) Rubber, Extreme-Low-Temperature Resistant, 65-75

作者:标准资料网 时间:2024-05-05 03:34:40  浏览:8447   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AMS3337
Title:Silicone (PVMQ) Rubber, Extreme-Low-Temperature Resistant, 65-75
Issuing Committee:Ams Ce Elastomers Committee
Scope:This specification covers a silicone (PVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. Primarily for parts required to operate or seal from -85 to +230 degrees C (-121 to +446 degrees F), compounded especially for operation at extreme low temperatures. Silicone rubber is resistant to deterioration by weathering and by high-aniline-point petroleum-base oils and remains flexible over the temperature range noted. These products are not normally suitable for use in contact with low-aniline-point petroleum-base fluids, including fuels, due to excessive swelling.
下载地址: 点击此处下载
基本信息
标准名称:压力输液设备用一次性使用液路及附件 第3部分:过滤器
英文名称:Fluid lines for use with pressure infusion equipment and accessories for single use—Part 3:Filters
中标分类: 医药、卫生、劳动保护 >> 医疗器械 >> 一般与显微外科器械
ICS分类: 医药卫生技术 >> 医疗设备 >> 输血、输液和注射设备
发布部门:国家食品药品监督管理局
发布日期:2005-12-07
实施日期:2006-12-01
首发日期:1900-01-01
作废日期:1900-01-01
归口单位:国家食品药品监督管理局济南医疗器械质量监督检验中心
起草单位:国家食品药品监督管理局济南医疗器械质量监督检验中心
出版日期:1900-01-01
页数:16开, 页数:8, 字数:10千字
适用范围

YY 0585的本部分知用于压力输液设备液路和YY 0286.4规定的压力输液器上用一次性使用无菌输液过滤器。不包括过滤器滤除微粒或细菌的有效性。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 医药 卫生 劳动保护 医疗器械 一般与显微外科器械 医药卫生技术 医疗设备 输血 输液和注射设备
【英文标准名称】:Aerospaceseries-Nuts,self-locking,MJthreads,inheatresistingnickelbasealloyNI-PH1302(Waspaloy),silverplatedoruncoated-Classification:1210MPa(atambienttemperature)/730°C-Technicalspecification
【原文标准名称】:航空航天系列.自锁紧、MJ螺纹、NI-PH1302耐热镍基合金(沃斯帕洛尹合金)制镀银或不镀银螺母.等级:1210MPa(室温)/730鳦.技术规范
【标准号】:BSEN3005-2005
【标准状态】:现行
【国别】:英国
【发布日期】:2005-01-06
【实施或试行日期】:2005-01-06
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:材料;紧固件;防松螺母;试验;公差(测量);尺寸;航空航天运输;定义;交货条件;验收规范;规范(验收);航天运输;质量保证;航空运输;高温;自锁紧;认证;螺母;镍基合金;耐热材料;镍合金
【英文主题词】:Acceptancespecification;Aerospacetransport;Airtransport;Certification;Definition;Definitions;Deliveryconditions;Dimensions;Fasteners;Heat-resistantmaterials;Hightemperature;Locknuts;Materials;Multilingual;Nickelalloys;Nickelbasealloys;Nuts;Qualityassurance;Self-locking;Spacetransport;Specification(approval);Testing;Tolerances(measurement)
【摘要】:
【中国标准分类号】:V20
【国际标准分类号】:49_030_30
【页数】:22P.;A4
【正文语种】:英语