您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE ARP1395 Minimum Requirements for Future Wide-Body Aircraft Cargo Systems and Compartments (Intermodal) (Cancelled Ma

作者:标准资料网 时间:2024-05-04 22:09:48  浏览:8349   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE ARP1395
Title:Minimum Requirements for Future Wide-Body Aircraft Cargo Systems and Compartments (Intermodal) (Cancelled Mar 2003)
Issuing Committee:Age-2a Cargo Handling Committee
Scope:The dedicated aircraft addressed herein is to be an uncompromised all-freighter aircraft developed primarily for use in the civil transport industry.The requirements of thsi document are applicable but not limited to airborne equipment which is subject to the airworthiness directives of FAR part 25 and which is designed to accmmodate unitized cargo in the form of intermodal containers and other compatible unitized load devices. Intermodability in the context of this document encompasses the air-truck-rail-sea modes, and considers uncertificated as well as certificated unit load devices (ULDs). This document covers the fundamental prerequisites for the aircraft cargo compartment and the onboard cargo handling and restraining system. The cargo system and compartment considers primarily 96 in (2.44 m) wide, multiple bottom configuration ULDs. The cargo system and compartment should handle outsize cargo and should consider Civil Reserve Air Fleet (CRAF) requirement compatibility. The cargo system, compartment, and the cargo-related aircraft physical features should be sufficiently defined to establish specifications for ground interface mobile and/or fixed loading equipment and facilities with a goal of standardization thereof. This document is intended to assist air carriers in standardizing to the degree necessary to insure the smooth flow of cargo between ground and aircraft and between various aircraft in the future. Thhis document is not intended to inhibit the development of new systems, but rather to establish a solid interface for the introduction of such systems.
下载地址: 点击此处下载
基本信息
标准名称:信息技术 开放系统互连 OSI登记机构的操作规程 第3部分:ISO和ITU-T联合管理的顶级弧下的客体标识符弧的登记
英文名称:Information technology - Open systems interconnection - Procedures for the operation of OSI registration authorities: Registration of Object identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T
中标分类: 电子元器件与信息技术 >> 信息处理技术 >> 计算机开放与系统互连
ICS分类: 信息技术、办公机械设备 >> 开放系统互连(OSI) >> 表示层
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-06-18
实施日期:2008-11-01
首发日期:2008-06-18
作废日期:
主管部门:国家标准化管理委员会
提出单位:中华人民共和国信息产业部
归口单位:全国信息技术标准化技术委员会
起草单位:中国电子技术标准化研究所
起草人:徐冬梅、郑洪仁、吴东亚
出版社:中国标准出版社
出版日期:2008-11-01
页数:12页
计划单号:20051292-T-339
适用范围

GB/T 17969的本部分规定了登记机构的操作规程,用于向ISO和ITU-T联合管理的顶级弧下的ASN.1客体标识符弧分配值,本部分同时规定了2.16.156弧下客体标识符值的分配。

前言

没有内容

目录

前言………………………………………………Ⅲ 引言………………………………………………Ⅳ 1 范围…………………………………………1 2 规范性引用文件……………………………1 3 定义…………………………………………1 4 缩略语………………………………………2 5 一般信息……………………………………2 6 登记表条目信息元素………………………2 7 规程…………………………………………3 8 弧2.16.156下的OID 登记……………………………3 附录A (资料性附录) 登记形式表…………………………………4

引用标准

下列文件中的条款通过GB/T17969的本部分的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本部分。
GB/T2659—2000 世界各国和地区名称代码(eqvISO3166:1997)
GB/T16262.1—2006 信息技术 抽象语法记法一(ASN.1):基本记法规范(ISO/IEC8824-1:2002,IDT)
GB/T16264.2 信息技术 开放系统互连 目录 第2 部分:模型(GB/T16264.2—1996,idtISO/IEC9594-2:1990)
ITUT 建议X.660|ISO/IEC9834-1:2005 信息技术 开放系统互连 OSI登记机构的操作规程:一般规程及ASN.1 客体标识符树的顶级弧

所属分类: 电子元器件与信息技术 信息处理技术 计算机开放与系统互连 信息技术 办公机械设备 开放系统互连(OSI) 表示层
基本信息
标准名称:钻井液用评价土
发布日期:1992-04-27
实施日期:1992-10-01
首发日期:1900-01-01
作废日期:1900-01-01
出版日期:1900-01-01
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 石油 石油勘探 开发 集输设备 石油钻采设备与仪器